Metabolomic pathway regulation for prevention and control of granule sludge bulking in thiosulfate-driven denitrification.

The performance of thiosulfate-driven denitrification (TDD) granule reactor and the mechanism of granule sludge bulking were investigated in this study. The results showed that TDD granule bulking occurred under 12 kgNm-3d-1 of nitrogen loading rate (NLR). The higher NLR promoted accumulation of intermediates in the carbon fixation pathway, including citrate, oxaloacetate, oxoglutarate and fumarate. The carbon fixation improved amino acids biosynthesis, which increased proteins (PN) in extracellular polymers (EPS) to 134.6 ± 11.8 mg/gVSS. The excessive PN altered the content, components and chemical groups of EPS, leading to change of granule structure and decline in settling property, permeability and nitrogen removal. By adopting the strategy of intermittently reducing NLR, excess amino acids in sulfur-oxidizing bacteria was consumed through microbial growth-related metabolism instead of EPS synthesis. Therefore, the nitrogen removal rate increased to 10.23 kg-Nm-3d-1 and maintained stable in the long term. The EPS contents decreased from 168.8 ± 13.5 mg/gVSS to 93 ± 11.5 mg/gVSS and the SVI5 decreased from 66 ± 3.5 ml/g to 25 ± 1.5 ml/g. These findings provide an effective strategy to prevent granule bulking and guide practical application of TDD process.

A sequential leaching procedure for efficient recovery of gold and silver from waste mobile phone printed circuit boards.

The present study reports a sequential, non-acid process for effective recovery of copper and precious metals from mobile phone printed circuit boards. In this process, gold and silver were first enriched during the synthesis process of cuprous chloride and then leached by thiosulfate method. Results indicated that the distribution of gold and silver in the liquid and solid phases during the synthesis of cuprous chloride process was affected by the [Cu]/[Cu2+] ratio. Enrichment of gold and silver in the residue after the cuprous chloride synthesis could be achieved by the adjusting the [Cu]/[Cu2+] ratio. The silver and gold leaching rates of the residue after cuprous chloride synthesis (93.8 % silver and 99 % gold) were much higher than those of the raw PCB sample (27.0 % silver and 14.2 % gold) under the same conditions. This process has the advantages of high leaching efficiency, high leaching rate and avoiding the use of HNO3 or aqua regia commonly used for copper, gold and silver recovery. Thus, this study offers a promising and environmentally friendly method for recovering valuable metals from e-waste.

The fast redox cycle of Cu(II)-Cu(I)-Cu(II) in the reduction of Cr(VI) by the Cu(II)-thiosulfate system.

Thiosulfate (S2O32-) is an important ligand to complex metal cations, however, the reactivity of metal-thiosulfate complexes has barely been mentioned. In this study, the reactivity of the Cu(II)-S2O32- system in the reduction of Cr(VI) was investigated. Kinetic results show that the reduction rates of Cr(VI) decrease with increasing pH values from 3.0 to 5.0, and 94.3% and 97.5% of 10 mg L-1 Cr(VI) was rapidly reduced within 1 min at pH 3.0 and within 30 min at pH 5.0, respectively at the molar ratio of Cu(II):S2O32- of 0.05. We rule out the contributions of S species of tetrathionate (S4O62-) and sulfite (SO32-) to Cr(VI) reduction and point out that the produced Cu(I) in the Cu(II)-S2O32- system is the key reductant that mediates the reduction of Cr(VI). We suggest that complexation between Cu(II) and S2O32- with the formation of CuII(S2O3)22- is the pre-requisite for the formation of CuI(S2O3)n1-2n, which plays an important role in Cr(VI) reduction, accompanied by the re-oxidation of Cu(I) to Cu(II) by Cr(VI), achieving the rapid redox cycling of Cu(II)-Cu(I)-Cu(II). Such a redox cycle also mediates the denitrification process of NO2- to NH3/NH4+ under weakly acidic conditions. This study enriches our understanding on the reducing reactivity of the Cu(II)-S2O32- system and the importance of the Cu(II)-Cu(I)-Cu(II) redox cycle towards environmental oxidizing contaminants.

Label-free detection of ssDNA base insertion and deletion mutations by surface-enhanced Raman spectroscopy.

Surface-enhanced Raman spectroscopy (SERS), as a label-free, highly sensitive analytical method, has become an important tool for providing substance fingerprints. In this study, silver nanoparticles containing thiosulfate ions and calcium ions (Ag@SCNPs) have been used as an enhanced substrate to eliminate the interference of impurities on DNA signals. Intrinsic structural information on single-strand DNA (ssDNA) was directly obtained through SERS. The improved enhancement system was used to explore the base-stacking rules of ssDNA in a solution environment. For the first time, single-base insertion mutations and deletion mutations, as well as their exact mutation sites, were identified, and Raman spectra with high stability, repeatability, and high signal-to-noise ratio were obtained. The method is simple, fast, and accurate, and the detection process is nondestructive. It has potential to be applied in the fields of medical diagnosis and genetics research.

HPLC Analysis of the Urinary Iodine Concentration in Pregnant Women.

Iodine is an essential component for fetal neurodevelopment and maternal thyroid function. Urine iodine is the most widely used indicator of iodine status. In this study, a novel validated ion-pair HPLC-UV method was developed to measure iodine concentration in clinical samples. A sodium thiosulfate solution was added to the urine sample to convert the total free iodine to iodide. Chromatographic separation was achieved in a Pursuit XRs C8 column. The mobile phase consisted of acetonitrile and a water phase containing 18-crown-6-ether, octylamine and sodium dihydrogen phosphate. Validation parameters, such as accuracy, precision, limits of detection and quantification, linearity and stability, were determined. Urinary samples from pregnant women were used to complete the validation and confirm the method's applicability. In the studied population of 93 pregnant women, the median UIC was lower in the group without iodine supplementation (117 µg/L, confidence interval (%CI): 95; 138) than in the supplement group (133 µg/L, %CI: 109; 157). In conclusion, the newly established ion-pair HPLC-UV method was adequately precise, accurate and fulfilled validation the criteria for analyzing compounds in biological fluids. The method is less complicated and expensive than other frequently used assays and permits the identification of the iodine-deficient subjects.

Solid-state and solution characterizations of [(TMPA)Cu(II)(SO3)] and [(TMPA)Cu(II)(S2O3)] complexes: Application to sulfite and thiosulfate fast detection.

Sulfite (SO32-) and thiosulfate (S2O32-) ions are used as food preservative and antichlor agent respectively. To detect low levels of such anions we used Cu(II) complex of the Tris-Methyl Pyridine Amine (TMPA) ligand, denoted L. Formation of [LCu(SO3)] (1) and [LCu(S2O3)] (2) in solution were monitored using UV-Vis, EPR and cyclic voltammetry, while the solid-state X-ray structures of both complexes were solved. In addition, we also evaluated the pH range in which the complexes are stable, and the anions binding affinity values for the [LCu(solvent)]2+ (3) parent complex. As a matter of illustration, we determined the sulfite content in a commercial crystal sugar.

Effects of albumin-bound nitrosyl iron complex with thiosulfate ligands on lipid peroxidation and activities of mitochondrial enzymes in vitro.

Nitric oxide (NO) mediates diverse physiological processes in living organisms. Small molecular NO donors usually lack stability and have a short half-life in human tissues, limiting the therapeutic application. The anionic tetranitrosyl iron complex with thiosulfate ligands (TNIC) is one of the most promising NO donors. This study shows that bovine serum albumin (BSA) can effectively stabilize the TNIC complex under aerobic (physiological) conditions, which contributes to its prolonged action as NO donor. Our results demonstrated that TNIC-BSA inhibits formation of TBARS - standard biomarker for the lipid peroxidation induced oxidative stress. Also, it was found that TNIC-BSA inhibits the catalytic activity of mitochondrial membrane-bound enzymes: cytochrome c oxidase and monoamine oxidase A. Together, these results demonstrate that, stabilization of TNIC with BSA opens up the possibility of its practical application in chemotherapy of socially significant diseases.

Identifying the chloroperoxyl radical in acidified sodium chlorite solution.

The present study identified the active radical species in acidic sodium chlorite and investigated the feasibility of quantifying these species with the diethylphenylenediamine (DPD) method. Electron spin resonance (ESR) spectroscopy was used to identify the active species generated in solutions containing sodium chlorite (NaClO2). The ESR signal was directly observed in an acidified sodium chlorite (ASC) aqueous solution at room temperature. This ESR signal was very long-lived, indicating that the radical was thermodynamically stable. The ESR parameters of this signal did not coincide with previously reported values of the chlorine radical (Cl●) or chlorine dioxide radical (O = Cl●-O and O = Cl-O●). We refer to this signal as being from the chloroperoxyl radical (Cl-O-O●). Quantum chemical calculations revealed that the optimal structure of the chloroperoxyl radical is much more thermodynamically stable than that of the chlorine dioxide radical. The UV-visible spectrum of the chloroperoxyl radical showed maximum absorbance at 354 nm. This absorbance had a linear relationship with the chloroperoxyl radical ESR signal intensity. Quantifying the free chlorine concentration by the DPD method also revealed a linear relationship with the maximum absorbance at 354 nm, which in turn showed a linear relationship with the chloroperoxyl radical ESR signal intensity. These linear relationships suggest that the DPD method can quantify chloroperoxyl radicals, which this study considers to be the active species in ASC aqueous solution.

Label-Free Detection of C-T Mutations by Surface-Enhanced Raman Spectroscopy Using Thiosulfate-Modified Nanoparticles.

Recent developments in molecular spectroscopy have widened the scope of surface-enhanced Raman spectroscopy (SERS) for detection of nucleic acids. In order to solve the interference of impurity signals in SERS analysis that hamper the reliable detection of DNA, Ag nanoparticles modified with thiosulfate ions were used to obtain SERS signals of DNA molecules in aqueous solutions, which showed good reproducibility. By using thiosulfate ions and calcium ions as aggregating agents, this method not only eliminated the influence of citrate on DNA signals completely but also obtained the signals for all bases indiscriminately, including the T base that was considered to have low Raman activity. Subsequently, the base stacking rule was used to identify mutations arising from C/T transition. It further identified the mutation sites of single-base C/T transition using this platform for the first time. This method has wide application prospects in DNA analysis, DNA sequencing, and genetic testing.

The optimal method for peroxydisulfate quenching: A comparison of commonly used reductants.

Peroxydisulfate-based advanced oxidation process has drawn increasing interest recently. Quenching the residual peroxydisulfate is essential for the accurate measurement of the concentration of target pollutants. However, it was rarely discussed which reductant is best for peroxydisulfate quenching. In this study, how the quenching of peroxydisulfate by four commonly used quenchers (methanol, ascorbic acid, sodium thiosulfate and sodium sulfite) affected the concentration of carbamazepine was investigated. Sodium sulfite reacted with carbamazepine directly, with the highest removal rate up to 39%. Higher carbamazepine removal rate was achieved by peroxydisulfate/sodium sulfite than by sodium sulfite alone. SO3•- and SO5•- rather than SO4•- played the major role in carbamazepine removal by sodium sulfite or peroxydisulfate/sodium sulfite. Methanol was found unable to reduce peroxydisulfate. Ascorbic acid, when used with a concentration more than three times higher than that of peroxydisulfate, was the best quencher with the lowest carbamazepine removal rate observed at a pH range of 3.5-10.0. Sodium thiosulfate was unfit for peroxydisulfate quenching at pH 3.5 as it was decomposed and formed bisulfite under strong acidic condition. The results of this study provided valuable guidance to the selection of proper quenchers for peroxydisulfate-related advanced oxidation processes.

Synthesis and characterization of molybdenum disulfide nanoparticles in Shewanella oneidensis MR-1 biofilms.

Shewanella oneidensis MR-1 is a dissimilatory metal-reducing bacterium capable of reducing various metal and sulfur compounds and precipitating them in nanoparticulate form. Here, we report the synthesis of molybdenum disulfide nanomaterials at the site of S. oneidensis biofilms grown in the presence of molybdenum trioxide and sodium thiosulfate. Samples from the growth medium were imaged using scanning electron microscopy and characterized using transmission electron microscopy, energy-dispersive x-ray spectroscopy, absorbance spectroscopy, and x-ray diffraction. These methods revealed the presence of molybdenum disulfide nanoparticle aggregates 50-300 nm in diameter with both hexagonal and rhombohedral polytypes. As a biosynthesis method for molybdenum sulfide, the use of S. oneidensis offers the advantage of significantly reduced heat and chemical solvent input compared to conventional methods of synthesizing molybdenum disulfide nanoparticles.

Increased Recovery of Gold Thiosulfate Alkaline Solutions by Adding Thiol Groups in the Porous Structure of Activated Carbon.

Thiosulfate leaching combined with ion-exchange resins is an innovative alternative for gold recovery. According to the properties of activated carbon, it could replace resins in the gold recovery process, improve efficiency, and reduce operating cost. In this research, the adsorption process of gold thiosulfate complex on thiol-modified activated carbon was studied. Thioglycolic acid (ATG) was impregnated in activated carbon, and its adsorption ability was tested with synthetic solutions of gold and sodium thiosulfate (Au 10 mg·L-1, Na2S2O3 0.1 mol·L-1, pH = 10.0). Carbon was characterized by infrared spectroscopy, SEM-EDS, PZC titration, hardness number measures, and proximal analysis. Synthetic solutions were also characterized by UV-vis spectroscopy and cyclic voltammetry. The percentage of volatile material increased from 10.0 to 13.9% due to the impregnation process of ATG. Infrared spectra show characteristic bands of C-H, S-H, and C-S bonds. In the adsorption tests, the ATG-impregnated carbon achieved 91% of gold recovery, while the same amount of ATG in the liquid phase stirred with unmodified activated carbon reached 90% of gold recovery. The 44.9% of gold recovered with activated carbon impregnated with ATG was eluted with sodium cyanide ([NaCN] = 0.2 mol·L-1; [NaOH] = 0.25 mol·L-1; [CH3CH2OH] = 30% V/V; pH = 12.0; t = 24 h). These results suggest the gold transferred from the thiosulfate complex to a new gold thiolate complex.

Colorimetric determination of Pb2+ ions based on surface leaching of Au@Pt nanoparticles as peroxidase mimic.

We report the first use of metallic nanozyme as colorimetric probe for Pb2+ determination. The method is based on the surface leaching of Au@PtNP nanozyme by Pb2+-S2O32- ions, accompanied by a decreased catalytic activity of the metallic nanozyme. To construct this colorimetric determination, the Pt deposition onto the AuNPs was carefully investigated and other experimental factors including kind of substrate and buffer were optimized. With increasing Pb2+ concentration, the catalytic activity of the Au@PtNPs decreased gradually. As a result, the blue color at 650 nm from the oxidation of 3,3',5,5'-tetramethylbenzidine by H2O2 faded gradually. A determination limit of 3.0 nM Pb2+ with a linear range from 20 to 800 nM was obtained. The assay demonstrated negligible response to common metal ions even at elevated concentrations. This colorimetric method was applied to the determination of Pb2+ ions spiked in lake water samples, and good recoveries (96.8-105.2%) were obtained. The above results indicate the potential application of metallic nanozymes in developing robust colorimetric assays. Graphical abstract Schematic representation of the surface leaching of Au@PtNP nanozyme by Pb2+-S2O32- ions, accompanying the decreased catalytic activity of the metallic nanozyme.

Influence of hemoglobin and albumin on the NO donation effect of tetranitrosyl iron complex with thiosulfate.

The effects of deoxyhemoglobin (Hb) and albumin on the NO-donor activity of the anionic tetranitrosyl iron complex with thiosulfate ligands (1) were studied for the first time. It was shown that Hb significantly stabilizes complex 1; in its presence, NO generation from the complex proceeds at a noticeably slower rate. A similar effect is observed when complex 1 is bound to albumin, in which case complex 1 decomposes 27 times slower than in the absence of albumin in the solution. The observed effects provide a prolonged action of complex 1 as NO-donor, which may enhance its potential pharmacological efficacy.

Sulfane sulfur - new findings on an old topic.

Sulfane sulfur is a divalent sulfur atom bonded to another sulfur which is very reactive and labile. Compounds containing this reactive sulfur include persulfides, polysulfides, thiosulfate, thiosulfinates, polythionates, and elemental sulfur. Sulfane sulfur appears in a number of biologically important compounds, including thiocysteine, thiocystine and thiotaurine, products of the cysteine metabolism, as well as glutathione persulfide. Sulfane sulfur compounds can modify cysteine residues in proteins via an S-sulfhydration reaction to produce protein persulfides. It has been also postulated that cysteine persulfides can be incorporated into proteins during translation. Recently, the sulfane sulfur compounds, especially the persulfides and polysulfides, have attracted increasing interest due to their regulatory and antioxidant properties. Compounds containing sulfane sulfur are also regarded as a form of H2S storage, which can easily release this gasotransmitter in response to biological signals. Both reactive sulfur species (H2S and sulfane sulfur) always coexist in biological systems. This review is focused on new findings in the field of sulfane sulfur's biological role, and disruption of its level in some patho/physiological conditions. A few sulfane sulfur donors with potential applications are presented. In recent years, in parallel to increasing interest in biological importance of sulfane sulfur, new analytical methods have been developed for sensitive and reliable determination of its level in the cells and tissues.

Antioxidant Activity of Tetranitrosyl Iron Complex with Thiosulfate Ligands and Its Effect on Catalytic Activity of Mitochondrial Enzymes In vitro.

The antioxidant and antiradical properties of the tetra nitrosyl iron complex with thiosulfate ligands (TNIC) were studied in vitro in mouse brain homogenates. It was found for the first time that TNIC is an effective antioxidant. The effect of TNIC on the catalytic activity of mitochondrial enzymes cytochrome c oxidase and monoamine oxidase A was studied. It was shown for the first time that TNIC is an inhibitor of the catalytic activity of cytochrome c oxidase and monoamine oxidase A in animal brain mitochondria in vitro.

Microbially Influenced Corrosion of Stainless Steel by Acidithiobacillus ferrooxidans Supplemented with Pyrite: Importance of Thiosulfate.

Microbially influenced corrosion (MIC) results in significant damage to metallic materials in many industries. Anaerobic sulfate-reducing bacteria (SRB) have been well studied for their involvement in these processes. Highly corrosive environments are also found in pulp and paper processing, where chloride and thiosulfate lead to the corrosion of stainless steels. Acidithiobacillus ferrooxidans is a critically important chemolithotrophic acidophile exploited in metal biomining operations, and there is interest in using A. ferrooxidans cells for emerging processes such as electronic waste recycling. We explored conditions under which A. ferrooxidans could enable the corrosion of stainless steel. Acidic medium with iron, chloride, low sulfate, and pyrite supplementation created an environment where unstable thiosulfate was continuously generated. When combined with the chloride, acid, and iron, the thiosulfate enabled substantial corrosion of stainless steel (SS304) coupons (mass loss, 5.4 ± 1.1 mg/cm2 over 13 days), which is an order of magnitude higher than what has been reported for SRB. There results were verified in an abiotic flow reactor, and the importance of mixing was also demonstrated. Overall, these results indicate that A. ferrooxidans and related pyrite-oxidizing bacteria could produce aggressive MIC conditions in certain environmental milieus.IMPORTANCE MIC of industrial equipment, gas pipelines, and military material leads to billions of dollars in damage annually. Thus, there is a clear need to better understand MIC processes and chemistries as efforts are made to ameliorate these effects. Additionally, A. ferrooxidans is a valuable acidophile with high metal tolerance which can continuously generate ferric iron, making it critical to copper and other biomining operations as well as a potential biocatalyst for electronic waste recycling. New MIC mechanisms may expand the utility of these cells in future metal resource recovery operations.

The synergistic interaction between sulfate-reducing bacteria and pyrogenic carbonaceous matter in DDT decay.

Although 1,1,1-trichloro-2,2-di(4-chlorophenyl)ethane (DDT) was banned in the United States in 1972, it is still often detected in sediments where pyrogenic carbonaceous matter (PCM) and sulfate-reducing bacteria (SRB) co-exist. In this study, we found that 70.2 ±â€¯0.2% of DDT disappeared in the presence of SRB and graphite powder, a model PCM, after 21 days at pH 7. Our results suggest that the observed DDT decay was due to the reaction between graphite powder and the reduced sulfur species that were produced by SRB. No biofilm formation was observed on the surface of graphite powder. Rather, the activity of SRB was inhibited by the presence of graphite powder. To understand the involvement of PCM in DDT decay, electrochemical cells and batch reactor experiments with sulfur-pretreated PCM as well as direct electrochemical reduction by a potentiostat were employed. Our results suggest that polysulfide, sulfide, sulfite, and thiosulfate could all react with PCM, forming surface-bound intermediates that subsequently led to DDT decay. The reactivity of reduced sulfur species was the highest for polysulfide, followed by sulfide, sulfite, and thiosulfate.

Heat Enhanced Follicular Delivery of Isotretinoin to the Skin.

PURPOSE: The aim of this work was to evaluate the use of short durations of externally applied heat with chemical penetration enhancers to improve delivery of isotretinoin to the skin and in particular via the follicular route. METHODS: A range of chemical penetration enhancers were screened for their ability to improve isotretinoin delivery into human skin with heat using infinite dose, Franz cell experiments conducted in a water bath at a higher temperature to simulate heated conditions. Following this a prototype external heating system was developed that provided short durations of heat and its ability to improve delivery of finite doses into the skin and hair follicles was assessed. RESULTS: The magnitude of the effect of heat on drug delivery was influenced by the choice of vehicle with changes in isotretinoin flux across skin ranging from not statistically significant to 25 fold increases with heat in the infinite dose studies. The prototype heating system provided significant increases in the total delivery of isotretinoin into the skin from an optimised vehicle. Drug distribution in the skin revealed significant increases in isotretinoin delivery to the hair follicles, and deeper skin layers, but not to the stratum corneum, providing strong evidence that the enhancement in delivery occurred mainly via the hair follicles. CONCLUSION: These data indicate that the use of short durations of heat combined with chemical penetration enhancers offers a valuable strategy for improving the delivery of drugs such as isotretinoin to the skin via the hair follicles. Graphical Abstract Schematic illustration of the sodium thiosulphate heating system on a Franz diffusion cell and the subsequent impact of a short burst of heat on the delivery of isotretinoin into human skin.

Branched-chain amino acid catabolism of Thermoanaerobacter strain AK85 and the influence of culture conditions on branched-chain alcohol formation.

The bioprocessing of amino acids to branched-chain fatty acids and alcohols is described using Thermoanaerobacter strain AK85. The amino acid utilization profile was evaluated without an electron scavenger, with thiosulfate, and in a co-culture with a methanogen. There was an emphasis on the production of branched-chain alcohols and fatty acids from the branched-chain amino acids, particularly the influence of culture conditions which was investigated using isoleucine, which revealed that the concentration of thiosulfate was of great importance for the branched-chain alcohols/fatty acid ratio produced. Kinetic studies show that branched-chain amino acid fermentation is relatively slow as compared to glucose metabolism with the concentrations of the branched-chain alcohol increasing over time. To understand the flow of electrons and to investigate if the branched-chain fatty acid was being converted to branched-chain alcohol, enzyme assays and fermentation studies using 13C-labeled leucine and 3-methyl-1-butyrate were performed which indeed suggest that carboxylic acid reduction is a source of branched-chain alcohols when Thermoanaerobacter strain AK85 was cultivated with thiosulfate as an electron scavenger.